Archived copy. This page was recovered from the Internet Archive snapshot of /display/SP/Local Platform instance at ONB taken on 2016-09-11. The original wiki at wiki.opf-labs.org is being decommissioned.

Local Platform instance at ONB

Created by Sven Schlarb on Aug 08, 2012 · last edited by MR · on Sep 20, 2012 (view history) · 4 versions

Basic cluster software

ubuntu 10.04.04 LTS

OpenSSH as part of the OS installation

Cluster Setup (2012.06): Cloudera CDH3u4 (see current status below)

JDK 6u33 - x64 (jdk-6u33-linux-x64.bin)

At the time of planning the experimental cluster setup, CDH4u0 based on Hadoop 2.0.0 and ubuntu 12.04 LTS have just been released. It has been decided by the development team to go with CDH3u4 (which is supported on 10.04 LTS but not on 12.04 LTS) and ubuntu 10.04.04 LTS because of stability reasons.

Current cluster software setup & history

2012.09 - update to Cloudera CDH3u5

Hadoop update 0.20.2+923.418 (previously 0.20.2+923.256)
PIG update auf Version 0.8.1+28.39-1 (previously pig-0.8.1+28.32)
HADOOP_HEAPSIZE=2000 (previously 1000)
MAP / REDUCE slot ratio 5/2 (previously 6/1)

Cluster hardware

NETWORK infrastructure

The CONTROLLER and the NODEs are connected to a GBit high performance network switch (guarantees the full GBit performance for each port) to the ONB internal network infrastructure. Since all machines are connected to ports on the same physical network switch, the traffic between the cluster machines does not affect the traffic on the ONB network.

CONTROLLER

Dell Poweredge R510
CPU: 2 x Xeon [email protected] Quadcore CPU (16 HyperThreading cores)
RAM: 24GB
NIC: 2 x GBit Ethernet (1 used)
DISK: 3 x 1TB DISKs; configured as RAID5 (redundancy) => 2TB effective disk space

NODE (worker nodes 1 to 5)

Dell Poweredge R310
CPU: 1 x Xeon [email protected] Quadcore CPU (8 HyperThreading cores)
RAM: 16GB
NIC: 2 x GBit Ethernet (1 used)
DISK: 2 x 1TB DISKs; configured as RAID0 (performance) => 2TB effective disk space

Comment: Some hadoop documentation recommends JBOD (Just a Bunch Of Disks) instead of RAID0 (stripe set). Unfortunately the RAID controller in the R310 does not offer JBOD functionality. If that impacts performance at all, the impact might be very, very small in our usage scenario.